Trade Union Facility Time
Duties, activities, paid release, representative facilities and clear operational decision-making.
◷ Download the complete guide (PDF)PRACTICAL ANSWERS
Questions employers ask.
Select a question to view the complete answer and its source reference. The complete original source is also available as a PDF.
Collective Agreements
18 questions
What is a collective agreement?
A collective agreement is an agreement or arrangement between one or more trade unions and an employer or employers’ association relating to matters within section 178(2) of the Trade Union and Labour Relations (Consolidation) Act 1992. It might deal with pay, hours, working conditions, union facilities or the machinery for consultation and negotiation. Its title is not decisive: a pay agreement, procedural agreement or recognition agreement may all fall within the statutory definition.
TULRCA 1992, section 178(1)-(2).
Is a collective agreement the same as trade union recognition?
Not necessarily. A recognition agreement establishes the union’s right to bargain for a defined workforce and usually sets out how the relationship operates. A substantive collective agreement may record a specific pay settlement, working arrangement or negotiated policy. Many organisations have a procedural recognition agreement alongside annual pay agreements and other collective instruments. A statutory workplace access agreement is a different legal mechanism; it does not by itself confer collective bargaining recognition.
TULRCA 1992, sections 178-179; Schedule A1 and Chapter 5ZA.
Which matters can be covered by collective bargaining?
Section 178(2) covers a broad range of matters, including terms and conditions, the physical conditions of work, engagement and termination, allocation of duties, discipline, trade union membership, facilities for officials and procedures for negotiation or consultation. Parties to voluntary bargaining can negotiate an agreed scope. Under the statutory recognition route, the prescribed core collective bargaining subjects are pay, hours and holidays. Employers should distinguish the bargaining subjects from issues on which the union is merely informed or consulted.
TULRCA 1992, section 178(2); Schedule A1, paragraph 3.
Does an agreement cover only trade union members?
Not necessarily. Collective bargaining usually concerns a defined bargaining unit, which can include workers who are not union members. A negotiated pay award may be implemented for all eligible workers in that unit. But whether any particular term is enforceable by an individual depends on the terms of their employment contract, the wording and scope of the collective agreement, and the rules on incorporation. Union membership is not, by itself, the test for whether an employment term is contractually binding.
TULRCA 1992, section 178; principles of contractual incorporation.
What about employees who join after the agreement was signed?
Check the agreement’s stated coverage and the new employee’s contract. Future joiners can be within the relevant workforce category, and contracts may refer expressly to terms negotiated collectively or updated from time to time. The fact that an earlier collective agreement is generally non-binding between its signatories does not automatically settle the position for new employees. Equally, do not assume every historic benefit applies to new recruits without checking the contractual documents and subsequent practice.
Employment contracts: incorporation principles; TULRCA 1992, section 179.
Can an employer have different agreements with different unions?
Yes. Employers may recognise different unions for separate bargaining units, or negotiate jointly with several unions representing the same unit. The documents should specify which union represents whom, how a joint union side reaches a position, and whether agreement with one union is sufficient to conclude a deal. Overlapping or inconsistent terms can create disputes about workforce coverage, pay relativities and authority. Keep a master agreement register rather than relying on historic meeting minutes to establish scope.
TULRCA 1992, section 178; collective bargaining and recognition agreements.
Are collective agreements legally enforceable between the employer and union?
Usually not. Section 179 creates a presumption that a collective agreement is not intended to be a legally enforceable contract between the parties. That presumption is displaced where the agreement is in writing and expressly states that it is intended to be legally enforceable; the parties can also make only part enforceable. This general rule is distinct from the special legal status of a bargaining method imposed by the CAC under Schedule A1. Do not assume that a signature alone makes the whole agreement legally binding.
TULRCA 1992, section 179; Schedule A1, paragraphs 31 and 63.
Can employees enforce terms arising from a collective agreement?
Yes, where the relevant terms have become part of their individual contracts. Incorporation may occur through express wording, implied terms or other recognised contractual mechanisms, depending on the facts. A pay rate or entitlement suitable for individual contractual enforcement may be enforceable even where the employer and union cannot sue each other on the collective agreement itself. Employers should examine the contract, agreement, staff communications and established practice before changing or withdrawing a collectively negotiated benefit.
Contractual incorporation principles; TULRCA 1992, section 179.
Is every clause in a collective agreement automatically contractual?
No. Clauses about joint meetings, dispute escalation or representation machinery are typically procedural; clauses setting individual pay, allowances or holiday entitlements may be capable of incorporation. The classification depends on wording, context and the parties’ intentions, rather than the heading under which the clause appears. A contract that refers to a collective agreement does not necessarily incorporate every provision. Employers should distinguish procedural commitments from personal employment entitlements when drafting or reviewing the agreement.
TULRCA 1992, section 179; established contractual incorporation principles.
What should a well-drafted collective agreement contain?
At a minimum, identify the parties, covered workforce, recognition and bargaining scope, negotiating forum, meeting and information-sharing arrangements, representatives’ authority, escalation process, how outcomes are recorded, and the arrangements for review, variation and termination. State whether any provisions are intended to be legally enforceable. Distinguish information, consultation and negotiation. For employers operating across multiple sites, specify how shift patterns, remote working, deadlines and exceptional decisions will be managed. The document should operate as a usable governance instrument, not a declaration of intent.
TULRCA 1992, sections 178-179; recognised bargaining practice.
Who has authority to negotiate and commit the employer?
The agreement should identify who leads negotiations, what decisions the employer side may make, and which proposals need additional approval. A manager’s willingness to discuss a figure is not necessarily authority to conclude a pay agreement. Adopt written internal negotiating parameters, escalation rules and a clear ratification process, and confirm the union side’s decision-making arrangements as well. Otherwise an apparently agreed position can later become a dispute over whether it was a recommendation, provisional settlement or binding implementation decision.
Good Work Lab employer governance practice; collective bargaining procedure.
What if the employer wants to make offers directly to employees?
Proceed carefully. Section 145B prohibits direct offers where acceptance would have the prohibited result of employment terms not being determined by collective agreement and the employer’s sole or main purpose is to secure that result. The Supreme Court in Kostal UK Ltd v Dunkley emphasised the significance of whether the agreed collective bargaining procedure had been exhausted. An impasse is not automatically the end of the procedure. Document the negotiating stages and obtain specific advice before a direct offer or unilateral pay implementation.
TULRCA 1992, section 145B; Kostal UK Ltd v Dunkley [2021] UKSC 47.
How should a negotiated pay award be recorded?
Record the exact amount or percentage, effective date, eligibility rules, grade or role coverage, treatment of allowances, back pay, part-year joiners and implementation timetable. State whether the deal settles a particular pay round and whether any issues remain open. Obtain approval from authorised representatives, circulate an agreed written record, and align payroll and contractual communications with it. A bare note saying “3% agreed” can conceal substantial differences over who qualifies and when the increase takes effect.
Collective bargaining practice; contractual incorporation principles.
Must employers disclose information to recognised unions?
Where the statutory conditions apply, sections 181 and 182 of TULRCA 1992 require disclosure of certain information needed for collective bargaining and consistent with good Industrial Relations practice, subject to statutory exceptions and limits. This is not an unrestricted entitlement to all internal documents. Establish the bargaining purpose, what information is held, whether disclosure is appropriate and whether confidentiality or other limits apply. Provide a reasoned response rather than ignoring requests or promising data that cannot lawfully be shared.
TULRCA 1992, sections 181-182; relevant Acas disclosure guidance.
What happens if collective negotiations reach an impasse?
Apply the agreed failure-to-agree procedure, including any senior-level escalation, further meetings or agreed conciliation. Document proposals, reasons and the point at which the procedure is considered exhausted. Where statutory recognition has resulted in a CAC-imposed bargaining method, that method can have a particular enforceable status; it is not simply a voluntary timetable that either party may disregard. Neither party is automatically required to accept the other’s preferred settlement, but procedural obligations and the risks of direct offers remain important.
TULRCA 1992, Schedule A1, paragraphs 31 and 63; section 145B.
Can the employer change a collective agreement unilaterally?
It depends on the particular instrument and its legal status. Most voluntary agreements provide for variation by agreement and a review process. A legally binding clause or a CAC-specified bargaining method may impose additional obligations. Even where the collective document is not enforceable between the parties, changing a term that has become part of individual contracts may require lawful contractual variation. Check the agreement, individual contracts, bargaining procedure and any statutory consultation obligations before announcing a change.
TULRCA 1992, sections 179 and 145B; Schedule A1; contract law.
Does terminating an agreement or derecognising a union remove existing employee rights?
No, not automatically. Termination or derecognition can affect future bargaining arrangements, but collectively agreed terms already incorporated into individual contracts may continue to bind the employer. The route for ending recognition also depends on whether it arose voluntarily or through the statutory process, and on any relevant terms or statutory restrictions. A strategic withdrawal from union relations is therefore not a shortcut to removing pay, holiday or other contractual entitlements. Assess the procedural and individual-contract consequences separately.
TULRCA 1992, sections 178-179 and Schedule A1; contractual incorporation.
What happens to collective agreements on a TUPE transfer or major restructuring?
TUPE can carry across rights connected with collective agreements existing at the transfer date, and union recognition may transfer where the transferred undertaking retains a distinct identity. There are specific rules on later collective changes and on variation of certain collectively derived terms. Do not assume that a change of employer, outsourcing or merger erases existing negotiated conditions, or that every future award negotiated by the old employer automatically applies to the new one. Map recognition, bargaining instruments and incorporated employee terms before decisions are finalised.
TUPE Regulations 2006, regulations 4, 4A, 5 and 6.
Trade Union Workplace Access
17 questions
What is the new statutory workplace access right?
The framework enables qualifying independent trade unions to request arrangements for union officials to meet or communicate with workers for specified purposes, including support, representation, recruitment, organisation and facilitating collective bargaining. Access can be physical, digital or a combination. It is a formal process for agreeing workable terms, not an unrestricted right to enter premises whenever a union wishes.
Reference: TULRCA 1992, Chapter 5ZA; statutory Code, paragraphs 9-18.
Does the union have to be recognised already?
No. Workplace access and collective bargaining recognition are separate legal processes. A qualifying independent union may seek access without an existing recognition agreement. Providing access does not itself confer recognition or require collective bargaining. A union may nonetheless use meaningful access to build relationships and membership support.
Reference: TULRCA 1992, Chapter 5ZA and Schedule A1; Code, paragraphs 9-18.
Does the 21-worker threshold apply separately to each company or workplace?
Not necessarily. The statutory test takes account of the employer and any associated employers. A company employing only 12 workers may fall within the regime if it is associated, within the statutory ownership and control rules, with another employer whose workers bring the combined count within scope. Equally, a union may request access to a workplace or defined group with fewer than 21 workers where the relevant employer meets the threshold. The number of workers named in the request is not the sole test.
Reference: Code, paragraph 21; Right to Access Workplaces Regulations 2026, regulation 7.
How is the 21-worker headcount calculated?
The exclusion for smaller employers depends on both the number of relevant workers on the day the request is received and the average number across the 13 weeks ending on that day. In the statutory rules, the CAC cannot grant access on this ground where both figures are fewer than 21, after taking account of associated employers and the relevant counting rules. The 13-week average is calculated by adding the worker count for each of the 13 weeks and dividing by 13. Employers should establish their figures before deciding that an access request is out of scope.
Reference: Right to Access Workplaces Regulations 2026, regulation 7; Code, paragraph 21.
Can we reject a request because the union has not used the Code’s template?
Not merely for that reason. The Code provides an access request template, but its use is encouraged rather than mandatory. Examine the information actually provided, identify any gaps and engage promptly with the union. Preserve the original request, including when it was received, because that date is crucial to the statutory timetable.
Reference: Code, paragraphs 26-30 and access request template.
What are the key statutory deadlines?
The employer’s ordinary response period ends on the 15th working day after the day the access request was given. The negotiation period generally runs for 25 working days after the response notice is given. A CAC application is ordinarily subject to a 55-working-day limit running from the original request, not from the response notice. The CAC may extend that limit to 70 working days in the prescribed circumstances. Keep three separate clocks; internal forwarding does not restart them.
Reference: Code, paragraphs 30, 33 and 36-44; Right to Access Workplaces Regulations 2026, regulations 3-5.
Can the parties extend deadlines by agreement?
The parties can agree an extension to the employer’s response period in accordance with the Code. Constructive negotiations may also continue beyond the 25-working-day negotiation period using the process described in the Code. However, do not assume an informal agreement suspends the separate CAC application deadline. Record the agreement in writing, check the applicable procedure and preserve the original request date.
Reference: Code, paragraphs 33 and 38-44.
Can we offer physical access instead of digital access, or vice versa?
Not as an automatic substitute. The access principles do not permit an employer to refuse one type of access solely because the other is available. Consider each proposed channel on its merits, supported by evidence about reach, practicality, security, workforce patterns and business impact. The employer may propose reasonable alternatives where necessary.
Reference: TULRCA 1992, section 70ZF; Code, paragraphs 20-22 and 97-104.
How often must we allow union access?
There is no single universal frequency. The arrangement should specify the frequency, duration, location or channels, required notice and administrative contacts. The terms should provide meaningful access while avoiding unreasonable interference with business operations. For shift-based, multi-site or remote workforces, one meeting time or channel may be insufficient.
Reference: Code, model terms and paragraphs 59-94.
Must access take place during paid working time?
Access will usually be arranged during normal working hours, with timings that minimise unreasonable disruption and allow relevant workers a reasonable opportunity to engage. The Code addresses payment where workers attend union access meetings with the employer’s agreement during working time. The practical terms should also consider breaks, shift handovers and workers whose schedules differ from ordinary office hours.
Reference: Code, paragraphs 79-83 and 88-94.
Can we restrict access where children or vulnerable adults are on site?
Safeguarding and the rights of service users are legitimate considerations, but not an automatic blanket exemption. Identify the specific risk: for example, protected areas, confidentiality, supervision or infection-control requirements. Consider designated staff spaces, visitor induction, appropriate times, restricted routes and other arrangements that enable meaningful access without compromising safeguards.
Reference: TULRCA 1992, section 70ZF; Code, access principles and practical arrangements.
What if access creates health, safety or security risks?
Assess the actual risks and document them. A supported objection to a particular location, time or method may justify proposing a safer alternative; a generic assertion that access is ‘disruptive’ is not enough on its own. Coordinate input from operations, facilities, health and safety, safeguarding, security and Industrial Relations, with an authorised lead negotiator.
Reference: Code, paragraphs 47-50 and 59-94.
How do digital access and workers’ personal data interact?
Digital access can be arranged through an employer-distributed message, a stand-alone union communication, an online meeting or another agreed channel. That does not automatically entitle a union to workers’ personal contact details or direct control of employer IT systems. Direct disclosure of personal data requires compliance with the specific statutory consent provisions and data protection law. Choose arrangements that can reach workers without routine work email, while protecting privacy.
Reference: TULRCA 1992, section 70ZL; Code, paragraphs 97-104.
How long can an access agreement last, and what happens at expiry?
The prescribed framework requires an access agreement to provide for automatic expiry no later than two years after it is made or treated as made following a CAC determination. Parties may agree an extension or replacement in accordance with the applicable statutory provisions. If no extension or replacement is agreed, the arrangement can expire; the union may make a further qualifying statutory request. The employer should diary the expiry and review arrangements in advance.
Reference: Right to Access Workplaces Regulations 2026, regulation 11; TULRCA 1992, section 70ZG.
What happens if the employer and union cannot agree?
Either party may be able to refer the dispute to the Central Arbitration Committee (CAC) within the applicable statutory period. The CAC assesses the request and relevant evidence against the statutory requirements and access principles, and may determine whether access is granted and on what terms. The employer should preserve its response, reasons, alternative proposals and operational evidence from the outset.
Reference: TULRCA 1992, sections 70ZE-70ZF; Code, paragraphs 43-50.
Are there financial penalties for non-compliance?
Yes, but distinguish the initial access-request process from the enforcement process for breaches of an access agreement. The statutory scheme provides for CAC consideration of complaints, findings and, where the applicable stages and conditions are met, potentially substantial financial penalties for further breaches. Employers should brief the managers responsible for implementation and monitor compliance with the terms actually agreed or determined.
Reference: TULRCA 1992, sections 70ZH-70ZK; Code, enforcement section.
Who should own the request internally?
Treat it as an Industrial Relations matter requiring accountable ownership. Nominate a central process lead, record the request date, calculate deadlines, establish authority to negotiate, and bring in legal, operations, facilities, information governance and health and safety specialists as required. A request should not be left with reception, site security or a local manager to handle independently.
Reference: Good Work Lab practitioner guidance informed by the webinar.
Trade Union Ballot Thresholds
18 questions
Are industrial action ballots and recognition ballots the same thing?
No. An industrial action ballot asks eligible trade union members whether they support proposed strike action or action short of a strike. A statutory recognition ballot, where the Central Arbitration Committee (CAC) orders one, asks workers in the determined bargaining unit whether the union should be recognised for collective bargaining. The electorates, procedures and thresholds are different; the result of one ballot cannot be used as the legal test for the other.
TULRCA 1992, sections 226-234 and Schedule A1, paragraphs 22-29.
What thresholds apply to an industrial action ballot?
Under the legal position described in Good Work Lab’s current reference materials, two conditions are required: at least 50% of those entitled to vote must participate, and a majority of the votes cast for the relevant proposal must favour industrial action. These are separate tests. The 50% turnout requirement is due to be removed by a distinct commencement step under section 68 of the Employment Rights Act 2025; the source materials reviewed do not establish that this repeal has commenced.
TULRCA 1992, section 226; Employment Rights Act 2025, sections 68 and 159.
Does the extra 40% support requirement still apply to important public services?
Not for ballots governed by the reforms effective from 18 February 2026. The additional requirement that at least 40% of all eligible voters must support action in specified important public services was removed by section 69 of the Employment Rights Act 2025, subject to transitional rules. Do not confuse its removal with the distinct 50% turnout requirement, whose repeal was deliberately deferred.
Employment Rights Act 2025, section 69; 2026 commencement and saving provisions.
How do we calculate the 50% turnout requirement?
Divide the number of eligible members who voted by the total number entitled to vote in that ballot. For example, with 100 eligible voters, at least 50 must participate to reach 50% turnout. A vote in favour from 30 of 40 voters is a 75% Yes vote among participants, but turnout is only 40%, so the industrial action mandate would fail the separate turnout condition if it applies.
TULRCA 1992, section 226; Employment Rights Act 2025, section 68 (uncommenced repeal in the reference materials).
How many Yes votes are enough once turnout is satisfied?
The proposal needs more Yes votes than No votes among valid votes cast on the question. With 100 eligible voters, 50 voting and a result of 26 Yes to 24 No, the turnout and majority tests are both satisfied. A 25-25 tie does not amount to a majority. Keep turnout, valid votes and the Yes/No result as separate figures when examining the ballot report.
TULRCA 1992, sections 226 and 229.
Do spoiled or invalid papers count towards turnout?
The statutory definition of voting introduced in the earlier regime includes those who returned spoiled or otherwise invalid ballot papers when calculating the number voting. However, those papers do not create valid Yes votes. The Employment Rights Act 2025 provides for the definition to be removed alongside the deferred repeal of the 50% turnout test. For an actual ballot, establish the applicable law, ballot-opening date and scrutineer’s figures before calculating the result.
TULRCA 1992, section 297A; Employment Rights Act 2025, section 68.
Has the 50% industrial action turnout threshold already been abolished?
Not on the basis of the available reference materials. Parliament provided for abolition in section 68 of the Employment Rights Act 2025, but its commencement was separated from the February 2026 repeal of the additional 40% support test. The government linked the timing to evidence about new voting methods. Before applying or publishing this as an operative threshold for a live ballot, check whether later commencement regulations have brought section 68 into force.
Employment Rights Act 2025, sections 68 and 159(5); Trade Union balloting measures introduced August 2026.
Can unions now hold electronic or workplace industrial action ballots?
Yes, under the relevant statutory and regulatory arrangements. From 25 August 2026, trade unions have been able to use approved electronic, workplace, hybrid or postal voting methods for industrial action ballots. The chosen method must comply with the corresponding procedural, security and independent-scrutiny requirements. Availability of a new voting method does not, by itself, abolish the separate turnout requirement.
Trade Unions (Permissible Means of Voting) and Employment Rights (Unfair Dismissal) (Amendment) Order 2026 (SI 2026/881).
Does a workplace ballot mean an employer must automatically provide premises?
No. Workplace balloting involves the relevant access and voting arrangements; the source material addresses voluntary employer access arrangements for the conduct of workplace votes. Employers should assess proposed rooms, security, confidentiality and safe operation without confusing permission for a polling location with the separate statutory right of union workplace access. Specific requirements depend on the balloting method and agreed arrangements.
TULRCA 1992, industrial action ballot provisions; 2026 voting arrangements and Codes of Practice.
Who should be included in an industrial action ballot?
The union must ballot members whom it reasonably believes it will induce to take part in the industrial action, subject to the statutory entitlement rules. The denominator for the turnout calculation is therefore the eligible union-member electorate for that ballot, not simply the employer’s entire workforce. An employer should not assume that the ballot percentage can be checked against payroll headcount without first establishing the balloting constituency.
TULRCA 1992, sections 227 and 230.
Can ballots covering several workplaces be assessed together?
Potentially. The legislation distinguishes separate workplace ballots and aggregate ballots covering members across locations. A ballot covering more than one workplace may satisfy the statutory tests in aggregate where the relevant rules permit this; separate ballots must be assessed separately. Obtain the union’s ballot notice, constituency information and scrutineer’s report before treating one location’s turnout or Yes vote as decisive for the others.
TULRCA 1992, sections 226-230; industrial action ballot procedures.
Who checks the ballot and its result?
Independent scrutiny is an important part of the industrial action ballot framework. A qualifying independent scrutineer is generally required, subject to a statutory exception for smaller ballots. For electronic or hybrid voting, additional security and verification requirements apply. Employers should review the reported number entitled to vote, turnout, votes for and against each proposition, spoiled ballots, dates and method used. A legal challenge should be based on a material procedural concern, not speculation about how members voted.
TULRCA 1992, section 226B and related provisions; 2026 electronic and workplace ballot framework.
Does a successful ballot mean industrial action can start immediately?
No. Statutory immunity depends on more than the voting result. The dispute and the union’s conduct must satisfy the relevant statutory requirements, including the notice of the proposed action to affected employers. The 2026 reforms reduced the standard notice period for industrial action to 10 days for cases to which the new provisions apply, with transitional rules for earlier notices. The separate notice of the ballot itself also has its own requirements.
TULRCA 1992, sections 226A, 234A and 244; Employment Rights Act 2025, sections 70 and 74.
How long can an industrial action ballot mandate remain effective?
For industrial action ballots opened on or after 18 February 2026, the statutory period of effectiveness was extended to 12 months. Earlier ballots are subject to the previous regime and are not automatically extended merely because the law changed while a mandate was running. Record the opening and closing dates, the applicable rules and the proposed dates of action.
TULRCA 1992, section 234; Employment Rights Act 2025, section 72 and transitional provisions.
Does ballot success make every proposed action immune from legal challenge?
No. A union still needs to comply with the applicable ballot, notification and trade-dispute requirements for statutory immunity. A valid majority does not cure failures in the relevant procedure. Equally, an employer should distinguish a genuine legal defect from an operational concern about disruption. The sensible approach is to verify notices and ballot results promptly while preparing service-continuity arrangements and continuing constructive engagement.
TULRCA 1992, sections 219, 226-235 and 244.
What is the voting threshold in a statutory recognition ballot?
For statutory recognition ballots covered by the reforms from 6 April 2026, the union needs a simple majority of the workers voting. The former additional requirement for Yes votes from at least 40% of the entire bargaining unit was removed. There are transitional rules for ballots which the CAC had already notified before 6 April 2026. The recognition test must be applied to the determined bargaining unit, not to an industrial action electorate.
TULRCA 1992, Schedule A1, paragraph 29; SI 2026/323.
Does the 50% industrial action turnout rule apply to recognition ballots?
No. The 50% turnout condition discussed in this guide concerns industrial action ballots. It is not a general trade union ballot threshold. In a statutory recognition ballot governed by the revised Schedule A1 rules, a simple majority of votes cast can support recognition even where fewer than half of workers in the bargaining unit vote. The CAC process and any applicable transitional rules must still be satisfied.
TULRCA 1992, Schedule A1, paragraph 29; section 226 (separate industrial action regime).
Is the 10% union membership test the same as the recognition ballot threshold?
No. For the post-April 2026 statutory recognition application process, the CAC must assess the prescribed membership-support percentage in the proposed or determined bargaining unit. The legal materials reviewed indicate that this presently remains 10%, with enabling powers to prescribe a lower figure within the statutory range. This is an application/admissibility test, not the percentage of Yes votes needed to win a later recognition ballot.
TULRCA 1992, Schedule A1, paragraphs 36, 45 and 171B; Employment Rights Act 2025 reform provisions.
Trade Union Facility Time
18 questions
What is trade union facility time?
Facility time commonly means the working time an employer releases a qualifying union representative from their normal duties to carry out recognised union responsibilities. It is distinct from the provision of physical or digital facilities, such as meeting space, access to a telephone or appropriate communication equipment. Some release is required by statute; additional arrangements may be negotiated through recognition agreements or workforce policies. A useful employer protocol identifies the role, purpose, payment status, approval route and recording method for each request.
TULRCA 1992, sections 168, 168A and 170; relevant Acas Code of Practice.
Who is entitled to paid time off for union duties?
Under section 168, an employee who is an official of an independent trade union recognised by the employer for collective bargaining is entitled to reasonable paid time off during working hours for specified union duties and approved training. An official may be a workplace representative properly elected or appointed under union rules. Recognition, the representative’s status and the purpose of the time off all matter. This is not an automatic entitlement to paid release for every employee who belongs to a union or every person holding a union title.
TULRCA 1992, sections 119 and 168.
Does facility time cover an employer with no recognised union?
The core statutory paid-time-off rights for trade union officials and learning representatives generally depend on recognition of the independent union and the statutory conditions being met. Other rights may still apply, including a worker’s entitlement to be accompanied at a qualifying disciplinary or grievance hearing, and separate statutory provisions for certain representatives. Employers may also voluntarily agree release arrangements. Workplace access rights are a different regime: a union seeking access to recruit or communicate with workers does not automatically gain collective bargaining recognition or a general facility-time entitlement.
TULRCA 1992, sections 168-170; Employment Relations Act 1999, section 10; workplace-access provisions.
Which activities normally qualify as paid union duties?
Qualifying duties under section 168 include work connected with collective bargaining, specified employer information and consultation functions, and approved Industrial Relations training relevant to those duties. Examples may include preparing for a pay negotiation, attending an agreed joint negotiating meeting, or participating in relevant collective redundancy or TUPE consultation. The representative must be released for a reasonable amount of time. The label on the meeting invitation is not decisive; assess what work is actually being undertaken and its statutory or agreed basis.
TULRCA 1992, section 168(1)-(3); Acas time-off guidance.
Are union meetings and campaigning automatically paid?
No. Section 170 provides qualifying members of recognised independent unions with reasonable unpaid time off for union activities and certain representative activities, subject to statutory conditions. Industrial action itself is excluded from this entitlement. Branch meetings, elections and internal organising are not automatically paid section 168 duties, although an employer may agree paid arrangements by contract or collective agreement. Separating a negotiating duty from a general union activity protects both statutory compliance and transparent budgeting.
TULRCA 1992, section 170; agreed contractual arrangements.
Do union learning representatives have paid time-off rights?
Yes, where the statutory conditions apply. A qualifying union learning representative may take reasonable paid time off to analyse learning needs, advise members about training, arrange or promote learning, consult the employer and prepare for those tasks. The union must notify the employer of the appointment, and the representative must satisfy the applicable training condition or notification arrangements. This should not be confused with an unlimited entitlement for all employees to undertake union-sponsored training during paid working time.
TULRCA 1992, section 168A.
How much facility time is reasonable?
There is no universal statutory quota or fixed number of hours. Reasonableness depends on the purpose and complexity of the duty, the number and location of workers represented, the representative’s workload, the urgency of the matter, established arrangements and legitimate service or production needs. A major restructuring consultation may justify more time than a routine monthly meeting. Employers should assess the request against the actual work required and record the reasons for any adjustment, rather than relying on an arbitrary allowance.
TULRCA 1992, sections 168(3), 168A; Acas Code on time off.
Can employers impose a fixed allowance or a blanket cap?
An agreed annual or monthly release allocation can support forecasting, line-manager cover and fairness between representatives. It should not be treated as an automatic legal ceiling that overrides the statutory right to reasonable time off. Exceptional bargaining, disciplinary accompaniment or urgent consultation may require a different assessment. Where a collective agreement specifies allocations, apply its review and escalation provisions and distinguish voluntary benefits from statutory minimum duties.
TULRCA 1992, sections 168-170; relevant recognition or facilities agreement.
What should happen when urgent release conflicts with operational needs?
Confirm what is requested, why the date matters, whether the function is statutory or agreed, and what cover is genuinely necessary. Explore workable adjustments – a different meeting time, shorter release, remote participation or alternate representative – while avoiding an approach that deprives the representative of the right in substance. Safeguarding, clinical cover and safety-critical operations can be relevant to reasonableness, but should be evidenced rather than used as an automatic refusal. Escalate unresolved requests promptly to a named Industrial Relations decision-maker.
TULRCA 1992, sections 168-170; Acas good-practice principles.
commencement
Must an employer provide meeting rooms, equipment or digital access?
Practical facilities may include a confidential meeting room, reasonable communication methods and access to relevant equipment. Historically, the general section 168 time-off right did not itself create an equivalent universal facilities duty, although other legal duties and negotiated terms could apply. Section 64 of the Employment Rights Act 2025 provides for reasonable accommodation and other facilities, on request, for qualifying union officials and learning representatives. Before treating the expanded duty as in force, verify the applicable commencement instrument and Acas Code.
Employment Rights Act 2025, section 64; TULRCA 1992, proposed sections 168(3A) and 168A(8A).
What changes does the Employment Rights Act 2025 make to facility-time disputes?
The reforms provide for complaints about failure to supply reasonable facilities and specify that, in certain complaints alleging refusal of time off, the employer must show that the proposed amount was not reasonable. The statutory framework and revised Acas Code also provide a stronger basis for examining accommodation, equipment and practical obstacles to representation. These provisions were scheduled for 30 October 2026 in the Drive materials reviewed; those materials do not themselves prove that every commencement step occurred. Confirm implementation before publishing or applying the revised enforcement provisions.
Employment Rights Act 2025, section 64; TULRCA 1992, sections 168, 168A and 172, as amended when commenced.
Do equality representatives now have paid time off and facilities?
Section 65 of the Employment Rights Act 2025 provides for a new statutory role under proposed section 168B. Subject to commencement and conditions, a recognised independent union’s properly notified equality representative may receive reasonable paid time off for defined equality functions, relevant training and reasonable facilities on request. The legislative scheme includes notification and training conditions; not every equality-related activity automatically qualifies. Employers should check commencement, the relevant Acas guidance, the representative’s status and the purpose of the request before applying the new entitlement.
Employment Rights Act 2025, section 65; TULRCA 1992, proposed section 168B.
representation
How should paid facility time be recorded and remunerated?
Use the applicable statutory and contractual payment rules and distinguish paid statutory duties from voluntary paid arrangements and unpaid activities. A clear recording system should capture the representative, date, time, general activity category, approved release and manager authorisation. Records should be proportionate: recording a confidential grievance worker’s identity or the substance of protected union communications is generally unnecessary for a payroll reconciliation. Agree how working time, shifts, overtime and payroll treatment will be administered rather than leaving each manager to improvise.
TULRCA 1992, sections 168-170; applicable pay and data-protection rules.
Do public-sector employers still have to publish annual facility-time statistics?
Not under the repealed section 172A regime for periods ending after 18 February 2026. Section 66 of the Employment Rights Act 2025 repealed TULRCA sections 172A and 172B, including the statutory publication framework and reserve powers, with effect from 18 February 2026. Transitional saving provisions preserve obligations for reporting periods that had already ended before that date. A public employer may still choose or be required under other arrangements to report internally or publish management information. Do not mistake an old template or historic guidance for a continuing statutory duty.
Employment Rights Act 2025, section 66; 2026 commencement and saving provisions, Schedule 2, paragraph 6.
Should employers agree a formal facility-time protocol with unions?
Yes. A short written protocol should cover who qualifies, what counts as duties versus activities, the request and approval process, release planning, urgent applications, reasonable facilities, payroll and reporting, confidentiality, disputes, review arrangements and who may authorise exceptions. Include line-manager training and a means of addressing cumulative workloads across several unions. An agreement is valuable because it reduces recurring disputes over individual requests – but it should not attempt to contract out of statutory protections.
Recognition agreements; Acas time-off Code; TULRCA 1992, sections 168-170.
Can an employer refuse a facility-time request?
The employer can examine whether the request comes from a qualifying person, relates to a qualifying purpose and involves a reasonable amount and timing of release. A decision to refuse or modify the request should be explained promptly, with reasons and sensible alternatives where possible. Blanket refusal because the employer dislikes the union, opposes a claim or wants to discourage representation may create legal and Industrial Relations risk. Keep the statutory entitlement separate from an optional extra agreed with the union.
TULRCA 1992, sections 168-170; section 172 remedies; other protections against union-related detriment.
What remedies or protections exist if time off is unreasonably refused?
Qualifying employees can complain to an employment tribunal about failures to permit statutory time off; the statutory scheme includes remedies and limits. Separate protections may apply against detriment or dismissal for trade union membership or protected activities. The 2025 reforms also contemplate complaints about failures to provide reasonable facilities, subject to their commencement. Employers should investigate contested requests, retain contemporaneous reasons, resolve disputes through the agreed escalation route and seek legal advice where a protected right or a time limit may be engaged.
TULRCA 1992, sections 146, 152, 168-172; Employment Rights Act 2025, sections 64-65.
What is the best employer approach to facility time?
Treat facility time as part of the organisation’s Industrial Relations operating framework, not a favour granted by a line manager. Identify recognised unions and representatives, classify protected duties and agreed activities, plan business cover, record paid release proportionately and make a single person accountable for legal interpretation and escalation. Review what is genuinely used and whether it supports timely consultation and negotiations. This is compatible with financial discipline: reasoned governance is more defensible than either unchecked release or reflexive restriction.
Good Work Lab practitioner guidance; TULRCA 1992, sections 168-170.
Trade Union Recognition
18 questions
What does trade union recognition actually mean?
Recognition means the employer accepts that a trade union may bargain collectively on behalf of a defined group of workers, known as the bargaining unit. It is not the same as acknowledging that workers belong to a union, consulting union representatives informally or providing workplace access. Recognition creates an organised relationship for negotiating specified employment matters. Under the statutory route, the core bargaining topics are pay, hours and holidays; voluntary agreements can cover a wider negotiated scope.
TULRCA 1992, sections 178 and 179; Schedule A1, paragraph 3.
Is workplace access the same as recognition?
No. Under the separate workplace access regime, a qualifying independent union can seek arrangements to meet or communicate with workers without being recognised for collective bargaining. Access may support recruitment or organising, but access alone does not confer recognition. A recognition request must be considered under its own legal route. Employers should use different procedures and deadline registers for access requests and recognition requests, rather than treating them as interchangeable.
TULRCA 1992, Chapter 5ZA and Schedule A1.
What is the difference between voluntary and statutory recognition?
Voluntary recognition arises through an agreement negotiated between employer and union. The parties can determine the appropriate workforce group, scope of bargaining, machinery, facilities and dispute arrangements. Statutory recognition is a prescribed route under Schedule A1 where a qualifying independent union seeks recognition and, failing agreement, may apply to the Central Arbitration Committee (CAC). The statutory process can result in recognition without employer agreement if the legal tests are satisfied.
TULRCA 1992, sections 178-179 and Schedule A1, Parts I-II.
Which employers and unions can use the statutory recognition route?
The request must come from an independent trade union with the necessary certificate of independence. The employer-size test looks at the employer together with any associated employers: it is met where there are at least 21 workers on the request date or an average of at least 21 across the relevant 13 weeks. A single employing company or site with fewer than 21 workers should not assume that it is excluded without checking the associated-employer and counting rules.
Schedule A1, paragraphs 5-9; relevant associated-employer provisions.
Does the proposed bargaining unit have to cover the whole organisation?
No. A bargaining unit may be defined by occupation, role, location or another identifiable grouping. It need not include everyone employed by the organisation. If the parties disagree, the CAC assesses whether the proposed unit is compatible with effective management, considering relevant matters such as existing bargaining arrangements, workforce characteristics, locations and the desirability of avoiding fragmented units. Employers should support their position with organisational evidence, not simply argue that a larger unit would be preferable.
Schedule A1, paragraphs 19A-19B.
What should a valid statutory recognition request contain?
The union’s request must be in writing, identify the union and proposed bargaining unit, and state that it is made under Schedule A1. It must be received by the employer, and the relevant independence and employer-size conditions must be satisfied. Record the request, any attachments and the date and method of receipt immediately. If the proposed unit is unclear, identify the issue promptly and seek advice before responding. The definition matters because a later CAC application must match the qualifying request.
Schedule A1, paragraphs 4-9; CAC guidance on recognition applications.
How quickly must an employer respond to a recognition request?
The initial statutory period is 10 working days, beginning with the day after receipt of a valid request. Within that period an employer may accept recognition, reject it while indicating willingness to negotiate, or reject it without offering negotiations. Where the employer is willing to negotiate, a further 20-working-day period generally follows, which the parties may extend by agreement. These are recognition rules; do not confuse the initial 10-day period with the separate 15-working-day response deadline for workplace access requests.
Schedule A1, paragraph 10.
Can an employer simply refuse to recognise the union?
An employer can decline a request for voluntary recognition, but that does not necessarily end the matter. If a qualifying independent union satisfies the statutory gateway and the parties do not agree recognition, the union may be able to apply to the CAC. Ignoring a request can accelerate rather than avoid a formal process. The practical response is to establish whether the request is valid, identify decision-making authority, assess the proposed unit and decide whether constructive negotiation is preferable.
Schedule A1, paragraphs 10-12 and 33-42.
What should employers do in the first ten working days?
Appoint an Industrial Relations lead, verify the union’s independence and the size test, preserve the written request, identify the proposed bargaining unit, and map existing recognition or collective agreements. Obtain reliable workforce and organisational information and settle an authorised response. If negotiating, determine who has authority to commit the organisation and what can be offered. Keep a dated record of the statutory clock and the reasons underpinning the employer’s position. A facilities or HR-only response without clear authority creates avoidable risk.
Good Work Lab employer practice checklist; Schedule A1, paragraphs 4-12.
How much membership support does the union need?
For applications governed by the post-6 April 2026 rules, the CAC assesses whether the union meets the statutory required percentage of membership in the relevant bargaining unit. The source materials reviewed for this edition indicate that the operative percentage remains 10%, although legislation allows it to be changed by regulations within a 2-10% range. The previous additional requirement to show that a majority would be likely to favour recognition was removed for applications covered by the April reforms. Check the applicable rules and transitional provisions in live proceedings.
Schedule A1, paragraphs 36, 45 and 171B; SI 2026/323.
Will the CAC always require a workforce ballot?
No. If the CAC is satisfied that more than half of the workers in the bargaining unit are union members, it will ordinarily declare recognition without a ballot. There are statutory exceptions, including where a ballot is appropriate in the interests of good Industrial Relations or credible membership evidence creates doubt about workers’ wishes. Where majority membership is not established but the application otherwise proceeds, the CAC ordinarily arranges a secret ballot.
Schedule A1, paragraphs 22-23.
What changed in recognition ballots from 6 April 2026?
For ballots governed by the new rules, recognition requires a majority of the workers who vote to support the union. The former separate condition requiring support from at least 40% of everyone in the bargaining unit no longer applies to those cases. Transitional provisions preserve the former rule where the CAC had informed the parties before 6 April 2026 that a ballot would take place. Employers should not rely on older summaries or apply the new rules indiscriminately to proceedings already underway before the reform.
Schedule A1, paragraph 29; SI 2026/323, transitional provisions.
What if another trade union is already recognised?
An existing collective agreement recognising a union may prevent a competing statutory application concerning the same workers, depending on the agreement’s scope and the statutory conditions. This requires careful examination of what rights were actually granted, which workers they cover and whether the agreement remains in force. Reforms effective from April 2026 also require certain recognition agreements made during a restricted period to be disregarded for relevant CAC admissibility and validity decisions. Do not create a hurried agreement solely to obstruct another application.
Schedule A1, paragraphs 35 and 44, as amended by the Employment Rights Act 2025.
Can the employer communicate directly with workers during the process?
Yes, but communication must be lawful, accurate and consistent with workers’ freedom to choose whether to join or support a union. Employers should avoid threats, inducements, coercive campaigning or other conduct that may fall within the statutory unfair-practices regime. Keep managers aligned on approved messages, distinguish factual explanations from pressure and preserve records. Be particularly alert to protections against detriment and dismissal connected with statutory recognition activity. Where a CAC process is underway, check the specific procedural rules in force at that stage.
Schedule A1, provisions on recognition ballots, unfair practices and worker protections.
Does a recognition application automatically give the union access to workers?
No unrestricted entry or communication right arises simply because recognition has been requested. There are procedural arrangements for union communications in CAC recognition cases and, separately, the statutory workplace access framework may apply independently of recognition. Employers need to identify which legal route is being invoked, what terms are proposed and who is responsible for implementation. Privacy, confidentiality, digital communications and worker availability should be addressed through the applicable process rather than imposed as blanket barriers.
Schedule A1, recognition communications provisions; TULRCA 1992, Chapter 5ZA.
What should a voluntary recognition agreement include?
A workable agreement should identify the parties and bargaining unit, specify matters for collective bargaining and consultation, and establish the negotiating forum, representative arrangements, information exchange, facilities, meeting frequency, dispute resolution, review, variation and termination provisions. Distinguish consultation from negotiation and state who can bind each organisation. For employers operating across locations or shifts, ensure that administrative arrangements are deliverable. The agreement should be a functioning Industrial Relations operating document, not just a statement of goodwill.
TULRCA 1992, sections 178-179; recognised good-practice agreement structure.
Does recognition mean the union can dictate pay or block organisational change?
No. Recognition establishes a right to engage in collective bargaining within the agreed or statutory scope; it does not automatically guarantee agreement on every proposal or give the union unilateral control of business decisions. However, the employer must respect applicable collective agreements, any statutory bargaining machinery and separate information, consultation or change obligations. The quality of negotiating preparation, authority, evidence and communication is often decisive in maintaining a workable relationship.
TULRCA 1992, sections 178-179; Schedule A1, statutory bargaining arrangements.
Can recognition later be reviewed, changed or ended?
Potentially, but not simply by withdrawing recognition overnight. The route depends on whether recognition is voluntary or statutory, the terms of any collective agreement, applicable statutory derecognition procedures and any relevant organisational change or TUPE circumstances. Some Schedule A1 situations involve restrictions and three-year periods. Before proposing derecognition or restructuring a bargaining unit, establish the source of recognition, the applicable process and whether collective terms have become incorporated into individual contracts. Obtain case-specific advice.
Schedule A1, Parts II-V; TULRCA 1992; TUPE 2006 where relevant.
No questions match your search. Try another word or phrase.
